MSite Face

✔️ Using infrared technology, the camera's built-in sensors can recognize faces quickly and accurately, even in poor lighting conditions.

✔️ As an anti-spoofing solution, MSite Face prevents spoofing using photography or 3D-printed masks, ensuring only legitimate workers are allowed on-site.

✔️ Since Face Reader is a contactless solution, it reduces the spread of germs. It also has an optional feature to automatically restrict site access if a worker's skin temperature is too high.

147mm x 334mm

98mm

0.5m ~ 1.3m

140cm ~ 190cm

-20°C ~ 50°C

0% ~ 80%, non-condensing

800 x 1280 pixels

Less than 0.5 sec

50,000

TCP/IP

IP65

Please ensure Temperature Screening module is installed in an indoor and windless environment.

≤±0.5°C (0.9°F)*/±0.3°C (0.5°F)**

*For ±0.5°C accuracy, use the device:

• In recommended ambient temperature (10°C to 35°C or 50°F to 95°F)
• 90 minutes after turning on for self-calibration

**According to KOLAS (Korea Laboratory Accreditation Scheme) calibration certificate.

120 x 160 (19,200 pixel)

25fps

≤ 50 mK (@25°C, F# = 1.0)

37.2° × 50° (H × V)

30°C to 45°C

50 cm~130 cm

USB

0°C to 50°C

Disclaimer

MSite products cannot be used to diagnose any medical condition. MSite Thermal cameras can only identify individuals with skin temperature higher than a preset figure but should not be solely or primarily relied upon to diagnose or exclude a diagnosis of COVID-19, or any other illness.

The accuracy of temperature readings can be impacted by various environmental conditions such as temperature, exposure to sunlight and exposure to windy conditions. The unit should be installed internally in a wind free environment.

Please ensure Temperature Screening module is installed in an indoor and windless environment.